Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 25 / 100

1 BASIC PRECAUTIONS FOR SAFETY
– 19 –
WARNING: Negligence of these instructions can lead to accidents.
1.11 During Servicing
■
Keep unauthorized persons away
• During service, do not allow persons not concerned
to enter the work area, particularly when grinding or
welding operation is performed or heavy hammers are
being used.
■
Assume an appropriate posture while working
• An unnatural posture during maintenance work may cause injuries. Assume a posture that
is appropriate for the work being carried out.
■
Keep your machine clean
• Spilled oil, grease or scattered debris are dangerous. Always keep your machine clean.
Moisture that penetrates into the electrical system can cause malfunctions. Do not use
water to clean sensors, connectors and the operator’s station.
■
Take care not to get caught or crushed
• Be sure to fix the hood and other covers after opening them to prevent closing and avoid
getting caught in them.
• If there is a need to crawl under the machine after it has been lifted, be sure to support it
from underneath with a solid prop or block.
■
When repairing the electrical system
• Read the warnings in this manual regarding the
handling of batteries, and make sure to have a
thorough understanding in order to handle them
appropriately and safely.
• When repairing the electrical system or welding,
disconnect the negative cable from the battery to shut
off the electricity. Carrying out work while the cables
are connected to the negative terminal may cause
electrocution or explosions.
■
Carefully handle high pressure hoses
• Do not try to bend or hit hoses against a hard object. Do not use hoses or pipes that are
bent or damaged. They will burst.
• Replace damaged fuel hose, hydraulic hoses and liquid hoses. An oil, hydraulic and liquid
fluid spill can cause a fire.