Sakai SV204 Series Скачать руководство пользователя страница 37

Страница: 37 / 100

2 OPERATION

– 31 –

2.1.4 Operating levers / pedals

Forward-Neautal-Reverse lever (F-N-R lever) with vibration switch

Moving the F-N-R lever forward or backward makes
the machine travel forward or backward respectively.
The neutral position brings the machine to a stop. The
machine speed increases or decreases in proportion to
the lever displacement.

Provided at the knob of the lever is the vibrator switch for
turning on or off the vibration.

IMPORTANT

• For normal braking, return the F-N-R lever back to neutral.
• In an emergency, depress the brake pedal.

Throttle lever

Shifts the engine RPM.
The engine RPM increases when moved toward the
operator.

Turn signal lever (option)

Turn signal lamp flashes when the turn signal lever is
operated.
Left turn : Move the lever forward.
Right turn : Move the lever backward.

NOTE: The lever does not return to the OFF position

even if the steering wheel is turned back.

Содержание SV204 Series





































































































Результаты поиска

Содержание SV204 Series

Отзывы:

Бренды по названию

Популярные бренды

Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание SV204 Series

Отзывы:

Бренды по названию

Популярные бренды