Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 20 / 100

1 BASIC PRECAUTIONS FOR SAFETY
– 14 –
WARNING: Negligence of these instructions can lead to accidents.
■
On a step slope, run the machine at low speed
■
When parking
• Select level and hard ground. If necessary to park on
a slope, chock the front of the drum and tire on the
downside of the slope.
• When required to park on the public road, provide
necessary markings such as flag, barriers and
illumination. However, be sure they do not obstruct
traffic.
• Stop the engine when getting off the machine. Remove
the key from the starter switch, and make sure it is
stored appropriately.
• Be sure not to get your hands caught in the chocks
when handling them.
1.6 Loading and Unloading
• Loading and unloading can accompany any danger.
Use extreme care.
• Select level and hard ground leaving a sufficient
distance from the shoulder of a road or bank.
• Use sturdy ramps with proper width, length and
thickness which allow safe loading and unloading. If
they deflect considerably under load, apply wooden
blocks to reinforce the ramps.
• To prevent your machine from crosswise slippage, keep the ramps free from oil, mud,
debris, etc. The drum must also be free from extraneous matter that can cause slippage.
• Do not steer your machine on the ramps. If the machine is facing in the wrong direction, go
back off the ramp, correct the direction and try again.
• Do not use kinked, twisted or damaged wireropes for crane or winch operation. Use ones
with ample strength.
• When loading is complete, fix the machine with wooden blocks placed under the drums
and chains fastened to the machine.
1.7 Transportation
• Follow required regulations.
• Select a transporting route according to the overall width, overall height and gross weight
of the trailer with the machine loaded.
• Know the maximum height clearance of the machine loaded on the transport trailer before
hauling under bridges and other structures.