Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 24 / 100

1 BASIC PRECAUTIONS FOR SAFETY
– 18 –
WARNING: Negligence of these instructions can lead to accidents.
■
Inspect or service your machine with the engine stopped
• If required to keep the engine running in such a case
as radiator interior cleaning, perform the work with
two persons. One of them should sit on the operator’s
seat getting ready for shutting down the engine. He
must take care not to touch any of controls carelessly.
Maintenance personnel must exercise extreme caution
not to make contact with moving parts.
■
Supplying fuel, oils and grease
• Do not cover the filler port when refueling. Feeding fuel in an airtight tank might damage
the fuel tank.
• Spilled fuel or oil will be slippery. Wipe up immediately. Keep the filler caps tight. Do not use
fuel for flushing oil. Handle fuel and oil in a well ventilated area.
■
Check the coolant level in the radiator
• To check the coolant level, stop the engine and allow the engine and radiator to cool
down before removing the radiator cap. Remove the cap by covering it with a rag before
removing to prevent any fluid that could spray under pressure from causing a burn.
■
Illumination
• For inspecting the level of the fuel, oil, coolant and
battery electrolyte, use explosion-proof illuminations.
Failure to use this type of illumination can result in an
explosion.
■
Make sure the gas dampers are properly maintained
• Before inspecting the engine room, make sure the gas dampers holding up the hood are
firmly engaged. Furthermore, in vehicles with stays to prevent the hood from closing, make
sure they are firmly in place.
■
Points to beware of when filling the sprinkler tank with water (on machine equipped
with a sprinkler tank)
• Do not fill the tank with the water inlet blocked. It may damage the sprinkler tank.