Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 75 / 100

3 PERIODICAL MAINTENANCE
– 69 –
⑨
Battery
This machine is equipped with maintenance-free batteries at the time of delivery.
Inspection and maintenance procedures for the batteries equipped on the machine
1) The condition of the battery can be confirmed by checking the indicator at the top of
the battery. Check the condition of the battery. Charge or replace it with a new one as
necessary.
Green ... Satisfactory (Good)
White .... Charging is necessary (Charging necessary)
Red ....... Replacement is necessary (Electrolyte insufficient)
2) When the terminal is loose, tighten it sufficiently, and thinly apply vaseline or grease to
prevent rusting.
Check and maintain the batteries other than
maintenance-required batteries.
1) With the caps removed, check to see if the electrolyte
level is above the plates.
2) Add distilled water or battery fluid commercially
available if the level is too low.
3) Retighten any loose terminal. Apply grease or vaseline
to the terminals to retard rusting.
4) Be sure to tighten the battery holder if it is loose.
5) Confirm that there is no abnormality in appearance.
WARNING
• Using or charging battery with electrolyte level below LOWER LEVEL mark on its
side, could result in explosion.
• Continuing to use battery with insufficient electrolyte accelerates deterioration
of the battery container internals. Be sure to have the electrolyte always
replenished to the prescribed level.
• Always keep away from fire as the battery may generate the flammable gas.
• Battery fluids are hazardous. Keep them away from eyes and skins. In case the
battery fluids accidently come in contact with skins and eyes, wash them off with
a large amount of water and go to see doctors for check-ups and treatments.
CAUTION
The power-supply voltage of this machine is 12V.