Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 14 / 100

1 BASIC PRECAUTIONS FOR SAFETY
– 8 –
WARNING: Negligence of these instructions can lead to accidents.
■
To handle the hydraulic fluid
• Wear safety goggles to protect your eyes from contact
with hydraulic fluid. It can irritate your eyes.
If the fluid contacts your eyes, flush with clean water for
15 minutes and get medical aid.
• The fluid can also irritate your skin. When handling it,
wear rubber gloves to avoid contact with it. In case of
skin contact, wash with soap and water.
• Be careful not to swallow the fluid. It can cause diarrhea
and emesis.
If swallowed, do not try to vomit. Get medical help
immediately.
■
Do not use worn tires (Tire installed)
• Tires may be damaged when they are scratched on curb stones, when the machine runs
over irregular surfaces of roads or projections on roads, and when the machine is operated
suddenly.
• Continued use of damaged tires will cause them to blow out. Replace them with new ones.
1.2 Preparation for Safe Operation
■
Clean the step, operator’s station and floor board and brake pedal
• Do not place parts, tools or unnecessary articles on the step, operator’s station and floor
board.
• Keep the step, floor board, brake pedal, controls and handholds free from muds, oil, ice
or water, as they can cause slippage. Repair them if found to be damaged. Tighten loose
bolts.
• Keep your boot soles free of oil or muds. They can slip, leading to an accident.
■
Inspect your machine before operation
• Check your machine for damage such as cracks and deformation. If found to be abnormal,
operate the machine after taking a proper measure to secure safety.
• Check the level of fluids (fuel, engine oil, coolant, anti-freeze and hydraulic oil). Add as
necessary.
• Check the area where the machine has parked for signs of leakage of oil, fuel and water. If
any leakage is noticeable, determine the cause and make corrections immediately.