manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 53 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 53

MAX100/200-OPERATION Rev200813

53

10.  FACTORY SETTINGS

Changing Factory Settings

NOTE: the shield icon 

 indicates that this parameter requires an advanced user access level.

 

Demo Mode 

Demo Mode allows for demonstration of product features and functions without connecting to an actual hardware 

component. To enable this option, follow these steps.

1.  Select 'FACTORY' item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select 'DEMO MODE' item. Press the 

SELECT

 button to display this submenu.

3.  Press the 

INCREASE 

or 

DECREASE

 button until the 'ENABLE' item is selected. Press the 

OPEN

 button 

to select 'ENABLE' .

4.  Press the 

MENU

 button to return to the Operator screen. 

5.  To disable demo mode, repeat steps 1-3, and select 'DISABLE' item.
 

NOTE: Please cycle power to the valve controller whenever the demo option is enabled or disabled.

Changing Product Model 

This feature is not supported on this product. 

Factory Reset 

This function restores the unit to factory settings. Performing a factory reset will erase all settings, except for 

the display module model. All system logs will be deleted. The setup process will need to be repeated. 

1.  Select 'FACTORY' item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select 'FACTORY RESET' item. Press the 

SELECT

 button to initiate the reset.

3.  When the dialog box appears, press the 

SELECT

 button to proceed with the reset, or the 

ON/OFF

 button to 

cancel the process.

Firmware Update 

The firmware running on the display module can be updated if necessary. The updates will be provided by the 

manufacturer. The firmware update files will be saved on a USB device.

1.  On the back of the unit, remove the USB access port cap located next to the wiring connector. Twist the cap 

counterclockwise

 to open it. Insert the USB device into the USB connector. 

2.  Cycle power to the display module. When the unit powers on, it will check 

the USB device for the firmware update files. If the files are found, the 

dialog box will be displayed.

3.  Press the 

SELECT

 button to access the 'UPDATES' menu. Available 

updates will be listed. Depending upon the files saved on the USB device, 

the following options may be available:

•  UPDATE SYSTEM–Update to the operating system
•  UPDATE SPLASH SCR.–Update to splash screen

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов