Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 108

Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 43

MAX100/200-OPERATION Rev200813

43

2. In USER SETTINGS, select the 'SELECTABLE DISPLAY' item using the

INCREASE

or

DECREASE

button. Press the

SELECT

button to enter

the submenu.

Select Variables for Selectable Display

This submenu lists all variables available for the Selectable Display. Each variable

can be individually enabled or disabled for this display. Available choices are:
•  FOAM FLOW (for associated discharge)
•  FOAM TOTAL (accumulated volume for associated discharge)
•  FOAM FLOW SYS. (for entire system)
•  FOAM TOTAL SYS. (accumulated volume for entire system)
•  FOAM TANK LEVEL [%]

*

• FOAM TIME TO EMPTY (estimated time to empty foam tank at current consumption rate)

*

• FOAM PRESSURE SYS. (foam manifold pressure)
• WATER PRESSURE (discharge water pressure –

MAX200 Fusion model only

)

•  WATER FLOW (for associated discharge)
•  WATER TOTAL (accumulated volume for associated discharge)
•  WATER TOTAL SYSTEM (accumulated volume for entire system)

NOTE: *Requires TankVision Pro Tank Vision Gauge

1. Select USER SETTINGS on the menu screen by pressing the

INCREASE

or

DECREASE

button. Press the

SELECT

button to access the submenu.

2. In USER SETTINGS, select the 'SELECTABLE DISPLAY' item using the

INCREASE

or

DECREASE

button. Press the

SELECT

button to enter the submenu.

3. In SELECTABLE DISPLAY, select the 'SELECT VARIABLES' item using the INCREASE or DECREASE

button. Press the SELECT button to enter the submenu.

4. List of variables will be displayed. Press INCREASE or DECREASE

buttons to select variables as needed. Press the SELECT button to enable

or disable the selected variable. Checkbox icon will reflect the change that

was made.

5. Press ON/OFF button to return to the previous menu.

Default Variable for Selectable Display

This submenu allows the operator to select a variable to be used as the default

for the Selectable Display. The default variable will be loaded into the Selectable Display on power-up and after timeout,

if timeout is set.

1. Select USER SETTINGS on the menu screen by pressing the

INCREASE

or

DECREASE

button. Press the

SELECT

button to access this menu.

2. In USER SETTINGS, select the 'SELECTABLE DISPLAY' item using the

INCREASE

or

DECREASE

button.

Press the

SELECT

button to enter the submenu.

«
...
41
42
43
44
45
...
»

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов