manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 41 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 41

MAX100/200-OPERATION Rev200813

41

NOTE

: If the value entered already exists as a preset, a duplicate preset will not be saved. The preset list will be 

updated and sorted after a new preset is added.

Changing Existing Preset Value

1.  Select USER SETTINGS on the menu screen by pressing 

INCREASE 

or 

DECREASE

 button until the USER 

SETTINGS item is selected. Press 

SELECT

 button to access the submenu.

2.  In USER SETTINGS, select the 'FOAM PRESETS' item using the 

INCREASE

 or 

DECREASE

 button. Press 

the 

SELECT

 button to enter the 'FOAM PRESETS' submenu.

3.  The current list of foam proportioning rate presets will be displayed. Value of each preset is displayed on 

the right side of the menu item. Press 

INCREASE

 or 

DECREASE

 button until the preset to be changed is 

selected. Press the 

SELECT

 button to edit the preset value. 

4.  Preset entry screen will open and preset value field with current value will be selected. Use 

ON/OFF

 or 

SELECT

 button respectively to decrease or increase value until new desired proportioning rate is reached. 

Holding down either button will make rate change by 0.5%.

5.   To save new value for the preset press 

INCREASE

 or 

DECREASE

 button until the ‘SAVE AND RETURN’ 

item is selected. Press the 

SELECT

 button to commit the change, or press the 

ON/OFF

 button to cancel the 

change (initial value will be restored).

NOTE

: If the value entered already exists as a preset, a duplicate preset will not be saved. The preset list will be 

updated and sorted after a new preset is added.

Deleting Preset Value:

1.  Select USER SETTINGS on the menu screen. Press 

INCREASE

 or 

DECREASE

 button until USER SETTINGS 

item is selected. Press 

SELECT

 button to access the submenu.

2.  In USER SETTINGS, select the 'FOAM PRESETS' item using the  

INCREASE

 or 

DECREASE

 button. Press 

the SELECT button to enter the foam presets submenu.

3.  The current list of foam proportioning rate presets will be displayed. Value of each preset is displayed on 

the right side of the menu item. Press 

INCREASE

 or 

DECREASE

 button until the preset to be deleted is 

selected. Press the 

SELECT

 button to enter the PRESET ENTRY screen.

4.  The preset entry screen will open and the current preset value will be selected in this field. Press 

INCREASE

 

or 

DECREASE

 button until the ‘DELETE’ item is selected. Press the SELECT button to delete this preset. 

The updated Preset list will be loaded after deletion is completed. To cancel delete action, press 

INCREASE

 or 

DECREASE

 button until the ‘SAVE AND RETURN’ item is selected. Press 

ON/OFF

 button to cancel and 

return to preset list.

NOTE

: If preset list has only 1 defined preset, this preset cannot be deleted (‘DELETE’ item will not be available). 

Preset value can be edited instead.

Setting Default Preset:

Default preset holds the foam proportioning rate to be automatically set after powering up the system. 
Default preset is indicated with a star icon on preset list.

1.  Select USER SETTINGS on the menu screen by pressing 

INCREASE 

or 

DECREASE

 button until the USER 

SETTINGS item is selected. Press 

SELECT

 button to access the submenu.

2.  In USER SETTINGS, select the 'FOAM PRESETS' item using the 

INCREASE

 or 

DECREASE

  button. Press 

the SELECT button to enter the foam presets submenu.

3.  The current list of foam proportioning rate presets will be displayed. Value of each preset is displayed on the right 

side of the menu item. The current default preset will be marked with a star icon. Press 

INCREASE

 or 

DECREASE

 

button to select another preset to be set as the default. Press the 

SELECT 

button to enter preset entry screen.

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов