MAX100/200-OPERATION Rev200813
29
User Access Level
To prevent unintentional parameter changes, a number of settings are only available to users with advanced access
permissions. In order to gain access to these settings, an operator needs to enter their access code.
NOTE: the shield
icon
indicates that this parameter requires an advanced user access level.
Advanced User Access Code:
1. Select ACCESS item in the main menu. Press the
SELECT
button to access the submenu.
2. Select 'ENTER CODE' item in the submenu. Press the
SELECT
button to open the code entry screen.
3. If the code is selected, use the
SELECT
button to increase the digit at the cursor position. Use
ON/OFF
button
to decrease the digit at the cursor position. Use the
INCREASE
or
DECREASE
button to move the cursor to
the next position.
Entered code is 3211
.
4. After the code has been entered, press the
INCREASE
or
DECREASE
button until the cursor reaches the end of
the code field. The next press of the
INCREASE
or
DECREASE
button will select 'CLEAR' item in this screen.
Or, press and hold the
INCREASE
or
DECREASE
button to until the 'CLEAR' item is selected.
5. Press the
INCREASE
or
DECREASE
button and select 'SAVE AND
RETURN' item. Press the
SELECT
button to confirm code entry, and the
display will revert back to the main menu screen. If code entry is successful,
an icon with a shield and checkmark will be displayed in the upper right
corner, which indicates the advanced user permissions have been granted.
Advanced User Logout:
To remove advanced user permissions, it is recommended to logout or cycle
the power to the unit.
1. Select ACCESS item in the main menu. Press the
SELECT
button to access the submenu.
2. Select 'LOGOUT' item in the submenu. Press the
SELECT
button to logout.
Содержание FoamPro Accumax II Fury
Страница 107: ...MAX100 200 OPERATION Rev200813 107 NOTES ...
Страница 108: ...MAX100 200 OPERATION Rev200813 108 ...