manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 34 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 34

MAX100/200-OPERATION Rev200813

34

Foam Tank Size

This setting defines the foam tank capacity. This number is used to calculate the amount of time until the tank is depleted 

at the current consumption rate. The "Foam Time to Empty" value can be selected as one parameter to be displayed on the 

operator's screen. Confirm the selected unit of measure (UOM) is the correct one. To change the UOM, see USER SETTINGS , 

UNITS SYSTEM menu. 

NOTE: 

This setting is only used when the TankVision Pro is installed along with the AccuMax system

.

1.  Select SETUP on the menu screen by pressing the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 

button to access this menu.

2.  In SETUP, select the 'FOAM TANK SIZE' item using the 

INCREASE 

or 

DECREASE

 button. Press the 

SELECT

 button to enter the setting screen.

3.  The display will show the current foam tank capacity selected. To change 

the value, use the 

SELECT

 button  to increase, and the 

ON/OFF

 button to 

decrease the value. To increment/decrement capacity automatically, press 

and hold the either button.

4.  To save the new value, press the 

INCREASE 

or 

DECREASE

 button until 

'SAVE AND RETURN' item is selected. Press the 

SELECT

 button to save 

the new value, and return to the previous menu. Or, press the 

ON/OFF

 button 

to cancel the change. 

TankVision Gauge Address Number

The setting selects the TankVision unit that matches the foam type used by AccuMax foam system. The TankVision 

unit types are identified by the address number (201-Foam A, 202-Foam B, 200-Other)

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select the 'TANK GAUGE ADDR.' item. Enter this submenu using the 

SELECT

 button.  

3.  The display will show Foam Tank Class options. To change the 

selection, press 

INCREASE 

or 

DECREASE

 button. 

4.  Press the 

SELECT

 button to apply the change. To return to the previous 

menu, press the 

ON/OFF

 button.

Water Flow Sensor Location

This setting indicates if the water sensor is installed before the foam concentrate 

injection point (WATER), or after the injection point (SOLUTION). NOTE: Make sure this setting matches the discharge 

configuration to ensure proper foam solution percentage.

1.  Select the SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select the 'WT. FL. SENS. LOC.' item. Enter this submenu using the 

SELECT

 button.  

3.  The display will show a list of options. To change the selection, press 

INCREASE 

or 

DECREASE

 button. 

4.  Press the 

SELECT

 button to apply the change. To return to the previous 

menu, press the 

ON/OFF

 button.

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов