Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 4

Страница: 4 / 108

MAX100/200-OPERATION Rev200813

3. INTRODUCTION
Overview: How the Foam System Works

The FoamPro AccuMax injection system is an electronically controlled, hydraulically driven, foam concentrate

proportioning system designed to provide the wide range of foam concentrate injection rates necessary for foam operations.

The FoamPro AccuMax system will accurately deliver from 0.1% to 10.0% foam concentrate.

The performance and accuracy of the foam system shall be in compliance to applicable sections of NFPA #1901

(mobile vehicle systems) or NFPA #20 (fixed systems). Please note: the installer shall be responsible for final compliance

of the assembled foam installation, setup, and testing to meet NFPA or 3rd party testing requirements.

The FoamPro AccuMax system is a flow-based proportioning system that measures water flow through specified

discharges or water manifold and injects the correct proportional amount of foam concentrate to maintain the desired

percentage. The basic system is comprised of the following five (5) assemblies for 1 to 15 foam line injectors and discharges:

a. Hydraulic System

: FoamPro shall furnish the hydraulic pump, hydraulic motor, and hydraulic controller shall be supplied

by Foam Pro. The hydraulic cooler and reservoir can be supplied by the final installer or Foam Pro.

b. Foam System:

FoamPro shall furnish foam line Injectors (FLI) for water manifold (single-point) or each discharge

(multi-point), low-flow assembly, Fury or Fusion foam displays, main foam flowmeter, foam pressure transducer, FRC

TankVision level display (or optional low-level sensor), and cabling for the foam system.

c. Electrical System:

FoamPro shall furnish displays and controls, electrical communication system, and cabling. The final

installer shall supply power supply fusing and wiring.

d. Foam Pump Components:

FoamPro shall furnish foam pump, relief valve, and foam pump inlet wye strainer.

e. Water Discharge Components:

FoamPro shall furnish water flowmeter & pressure transducer (single-point) or water

flowmeters and pressure transducers on each discharge (multi-point). Fusion and APEX systems have Elkhart electric

valves furnished by Foam Pro.

The hydraulic controller operates the hydraulic drive system to supply the proper amount of foam concentrate required

for the AccuMax operation and foam line controllers in use. A ‘wye’ strainer shall be installed before the foam pump to

protect the positive displacement foam pump from debris. A safety pressure relief valve shall be installed downstream of

the foam pump to recirculate foam to the suction side of the foam pump. This relief valve shall be supplied by FoamPro

and approved by the foam pump manufacturer. Hydraulic power to operate the foam pump shall be provided by a separate

hydraulic pump, in mobile systems shall be driven by the transmission mounted PTO and fixed systems by an electric

motor or diesel engine. The foam concentrate line (from the foam pump) shall have a pressure transducer to control the

hydraulic system.

The foam line controller (FLI) shall consist of foam flowmeter, foam control valve, foam injection check valve, and

a calibrate/inject valve. The AccuMax Fury or Fusion or Fusion/Apex displays communicate the proper information to

ensure the proper amount of concentrate is dispensed to the foam manifold or to the discharge that it controls.

The AccuMax II displays are in constant communication with hydraulic controller, foam line injector (FLI), water

pressure transducer(s), and water flowmeter(s) to determine the correct amount of foam concentrate required and to

control the hydraulic pump to provide the hydraulic flow to drive the foam pump to deliver the proper amount of foam

concentrate. Additionally, the AccuMax system monitors the foam flow through the master foam flowmeter from the

discharge of the foam pump. The AccuMax Fusion or Fury display menu allows the operator in “menu mode” to display

various functions and settings for foam system operator information.

Содержание FoamPro Accumax II Fury













































































































Результаты поиска

Содержание FoamPro Accumax II Fury

Отзывы:

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 4 / 108

Результаты поиска

Содержание FoamPro Accumax II Fury

Отзывы: