manualshive.com logo in svg

Safe Fleet FoamPro Accumax II Fury, Инструкция по эксплуатации, установке, калибровке, обслуживанию и каталог запасных частей, Страница: 35 / 108

Поделиться
Скачать
Safe Fleet FoamPro Accumax II Fury Скачать руководство пользователя страница 35

MAX100/200-OPERATION Rev200813

35

Reading Water Flow from Remote CAN Device (WT. FLOW SOURCE ID)

This setting selects the water flow reading source to be local, sensor connected to injector, or remote sensor connected  

to another device on the CAN network. Use "LOCAL" option if the sensor is connected to the injector, or select the "DEVICE 

ID" of the device providing the water flow reading.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select 'WT. FLOW SOURCE ID.' item. Enter this submenu using the 

SELECT

 button.  

3.  The display will show a list of options. To change the selection, press 

INCREASE 

or 

DECREASE

 button. 

4.  Press the 

SELECT

 button to apply the change. To return to the previous 

menu, press the 

ON/OFF

 button.

Hydraulic Controller Backup

The setting indicates if the Hydraulic Controller Backup option is installed.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access 

this menu.

2.  Select 'HYD CNTL BACKUP' item. Enter this submenu using the 

SELECT

 button.  

3. Press 

INCREASE 

or 

DECREASE

 buttons to select the desired option.

4.  Press the 

SELECT

 button to apply the change. To return to the previous menu, press the 

ON/OFF

 button.

Valve Polarity (for MAX200 Fusion models only) 

Valve Polarity setting allows the valve direction of travel to be changed. If the valve opens when the 

ON/OFF

 button 

is pressed, or closes when the 

SELECT

 button is pressed, then the valve polarity setting must be changed.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select 'VALVE POLARITY' item. Enter this submenu using the 

SELECT

 button.

3.  The polarity settings list will be displayed with the current setting selected. To change this setting, press 

INCREASE 

or 

DECREASE 

 button to select the other setting. Press the 

SELECT

 button to apply the change. 

To return to the previous menu, press the 

ON/OFF

 button.

NOTE

: After the polarity setting is changed, valve calibration is required. A message will be shown on the display 

prompting the user to calibrate the valve. To immediately perform valve calibration, press

 

the 

SELECT

 button. 

To perform calibration later, press the 

ON/OFF

 button. 

The valve will not work correctly until the calibration 

is done. 

Flow Cut-off

The Flow Cut-off setting determines the lowest flow rate that will be displayed. Any flow rate below the set value 

will be shown as 0.

1.  Select SETUP item in the main menu. Press the 

SELECT

 button to access this menu.

2.  Select 'FLOW CUT-OFF' item. Enter this submenu using the 

SELECT

 button.  

3.  The display will show the current Flow Cut-Off value selected. To change the preset value, use the 

SELECT

 

button to increase, and the 

ON/OFF

 button to decrease the value. 

4.  To save the new Flow Cut-Off value, press 

INCREASE 

or 

DECREASE

 button until 'SAVE AND RETURN' 

item is selected. Press the 

SELECT

 button to save the new value, and return to the previous menu. Or, press 

the 

ON/OFF

 button to cancel the change.

Содержание FoamPro Accumax II Fury













































































































Отзывы:

Нет отзывов