Figure 5.7
Selecting performance log parameters
Figure 5.8
Performance log window
Time interval can be chosen between 1 min, 15 min or 1 hr. You can also define the start time
and the start date. When start values are defined, it is also possible to define the end time and the
end date.
TS (threshold seconds) show the amount of seconds in a chosen period (1min, 15min or 1h) when
the parameter has been out of bounds set by performance thresholds in ‘Configuration
Performance log configuration’.
To define thresholds from where TS (threshold seconds) will be counted, you must go to
‘Configuration
Performance log configuration’ and enter preferable threshold values. Refer to
Chapters 5.2.1 and 5.2.2 for further details on threshold seconds.
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
89