SAF CFIP PhoeniX Series, Руководство по настройке

Страница: 82 / 123

12 12 IDU temperature fault Temperature is out of defined range
13 13
No data from main PSU IDU ADC No data from IDU ADC connected via I2C
interface
14 14 Main supply 48V failure Main supply voltage is out of defined range
15 15
IDU PSU state One of the possible PSU state
"OFF","IDLE","Ok","OVERLOAD","SHORT","
FAULT" state was changed for IDU
16 16
No data from main PSU ODU
ADC
No data from ODU ADC connected via I2C
interface
17 17
IDU PSU to ODU state One of the possible PSU state
"OFF","IDLE","Ok","OVERLOAD","SHORT","
FAULT" state was changed for ODU
18 18
No data from PSU temperature
sensor
No data from PSU temperature sensor via
I2C interface
19 19 PSU temperature fault PSU temperature is out of defined range
20 20
Main 3,3V PSU failure Main supply 3,3V voltage is out of defined
range
21 21
No data from power supply ADC No data from ADC connected via I2C
interface
22 22 1,0V failure Power supply voltage out of defined range
23 22 1,2V failure Power supply voltage out of defined range
24 22 1,5V failure Power supply voltage out of defined range
25 22 2,5V failure Power supply voltage out of defined range
26 22 3,3V failure Power supply voltage out of defined range
27 22 Main 3,3V failure Power supply voltage out of defined range
28 22 5,0V failure Power supply voltage out of defined range
29 23 No data from RADIO No data from ODU
30 24 Rx level alarm Rx alarm level is out of defined range
31 25 Tx PLL error alarm Tx PLL failure
32 26 Rx PLL error alarm Rx PLL failure
33 29 ODU TX LOS Tx IF AGC error is greater than 2 dB
34 31 ODU TX failure Tx RF AGC error is greater than 2 dB
35 28 ODU RX LOS RxPow < RslMinPower
36 30 ODU RX failure Rx AGC error is greater than2 dB
37 32 ODU TX Frequency failure Tx synthesizer could not synchronize
38 32 ODU RX Frequency failure Rx synthesizer could not synchronize
39 32 ODU IF Frequency failure IF synthesizer could not synchronize
40 27 ODU Temperature alarm ODU sends temperature alarm
41 27
ODU Temperature fault ODU temperature is out of defined range U
temperature is out of defined range
42 33 ODU Tx mute on ODU transmitter was muted
43 34 ODU RF loopback on ODU radio frequency loopback was enabled
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide • Rev. 1.13 •
© SAF Tehnika JSC 2015
82