35.
Excessive defers
– packets deferred in excess of 6,071 nibble times in 100 Mbps
mode, or 24,287 bit-times in 10 Mbps mode;
36.
Non-exc. defers
– packets deferred for at least one attempt, but less than an
excessive defer;
37.
Broadcasts
– packets, which destination address contained broadcast address;
38.
Multicasts
– packets, which destination address contained multicast address;
39.
Dones
– transmission of packets successfully completed;
40.
Length check errors
– frame length field in the packet does not match the actual
data byte length and is not a Type Field;
41.
CRC errors
– frame CRC do not match the internally generated CRC;
42.
Collisions
– number of collisions the current packet incurred during transmission
attempts;
43.
Byte counter
– total count of bytes transmitted on the wire not including collided
bytes;
44.
Rx Q1 frames
– number of frames received on Q1;
45.
Rx Q1 dropped
– number of frames dropped on Q1;
46.
Rx Q2 frames
– number of frames received on Q2;
47.
Rx Q2 dropped
– number of frames dropped on Q2;
48.
Tx frames
– number of frames passed through TX FIFO;
49.
Tx dropped
– number of frames dropped in TX FIFO.
5.4
Ethernet switch statistics
Ethernet switch statistics window shows the full Ethernet statistics of CFIP switch since unit start
or statistics reset. All statistics are also accessible using command prompt command
ethernet
counters
<1|2|3|4|5|6|All|Clear>.
Explanation of fields:
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
95
