Figure 4.11
CFIP PhoeniX configuration for 1+1 FD mode
Please refer to Chapter 4.3.5 for details of 1+1 configuration parameters and configuration
possibilities via CLI. After successful 1+1 FD configuration, the screen of ‘Protection configuration’ in
Web GUI should look as follows:
Figure 4.12
Protection configuration window after successful FD configuration
4.3.2
Hot Standby (HSB) and Space Diversity (SD) protection modes
For HSB and SD mode two transmitters are operating at the same frequency. One of the
transmitters is in operation ‘Active’ while the other one is in ‘Standby’ mode (Tx power is muted). The
data is duplicated at the transmitter side of the working link and sent towards receivers of both links
(working and protection). The decoder of working unit selects the preferred link.
Setup for 1+1 Hot Standby (HSB) and Space Diversity (SD) protection modes
CFIP PhoeniX Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.13
•
© SAF Tehnika JSC 2015
49