-7-
3. User Logs in & Logs out
To input user
’
s name and password is a safety precaution. It only allows the person who has user limit to use
the system. Matrix user must have a correct name and password to enter the system. The factory password is
in default status. This system allows max 131 users and their independent password including 64 KB users,
64 PC users and 3 administrators. The newly purchased matrix or reset system is in default status. The
administrator can enter the system according to the default.
SAE-M8000 matrix system has two kinds of users which are the administrator and the user. Besides, users
have different use limit according to different priority.
3.1Administrator Logs in & Logs out
The registered administrator should input his name and password in the system controller to operate the
system. The administrator
’
name and password are set through system program and keyboard. If the
name and password inputted do not accord with the registered, system will refuse his entry. Administra-
tor can input his name and password in any controller to enter the system.
Administrator Logs in
: After the keyboard is powered on, administrator should input his name and
password to enter the system under the instruction of LCD.
Administrator Logs out
: Press F2 to logs out the system.
Administrator Modify User
’
s Password
: The administrator can enter the system menu to set pass-
words of all the users in advance. After determining the priority of each user, administrator should give
passwords to each user based on his priority level. User must register before entering
Administrator Clear User
’
s Password
: If necessary, system master can clear any user
’
s name and
password.
3.2 User Logs in & Logs out
User Logs in:
After keyboard powered on, user must input his name and password given by administra-
tor to enter this system under the instruction of LCD
User Logs out:
Press F2 to logs out the system.
