-36-
and the above steps remain unchanged. The original numbers of all the steps after Step 05 will be changed
by adding 1. The inserted step will be Step 06. After the insertion, the Length number will be changed by
adding 1.
6. Delete: move the flashing cursor to the step which is to be deleted. For example, to delete Step 05, just
press CLEAR key on keyboard to delete. 4 steps before the original Step 05 remain unchanged. The step
numbers after the original Step 05 will be changed by decreasing 1. The Length number will be changed
by decreasing 1.
7. After completing all the above settings, turn the joystick anticlockwise to return to the GROUP number
selection menu.
8. If other GROUP needs to be edited, select the GROUP number and repeat the upper steps to complete the
program. Move the joystick left to exit.
5.7 Fortify Setup
Select<Fortify Setup>from<System Setup Menu>: Move the joystick up and down at the <System Setup
Menu>, move the flashing cursor to 7, then enter<Fortify Setup>by moving the joystick right or input num-
ber 7 directly at the<System Setup Menu>; <Fortify Setup>includes four setups: 1<Probe Config>, 2<Fortify
Mode>, 3<Fortify Area>, 4<Fortify Form Setup> As figure 49 shows.
Figure 49
Fortify Setup
Setting at<Fortify Setup>menu:
1. Move the flashing cursor to the selected item by moving the joystick up and down. Enter the selected item
by moving the joystick right or input the selected item number directly.
2. If no item needs to be changed, move the flashing cursor to 0, then move the joystick right to exit or input
0 directly to exit.
5.7.1 Probe Configuration
Select<Probe Config>from<Fortify Setup>: Move the joystick up and down at the<Fortify Setup>menu,
move the flashing cursor to 1, then enter<Probe Config>by moving the joystick right or input number 1
directly at the<Fortify Setup>submenu. As figure 50 shows:
Fortify Setup
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
1
．
Probe Config
2
．
Fortify Mode
3
．
Fortify Area
4
．
Fortify Form Setup
0
．
Exit
15/7/2004 16:42:32
