-59-
B. Valid: if the user limitation set to be valid, call salvo switch is valid.
Note: error messages will appear when the salvo group number exceeds the system
’
s max group number
10 or call the invalid group numbers.
9.5 User control fortify
You can set each user
‘
s limitation for fortify:
A. Invalid: if the user limitation set to be invalid, all the arm/disarm in the area and the alarm ACK are
invalid.
B. Valid: if the user limitation set to be valid, all the arm/disarm in the area and the alarm ACK are
valid.
9.6 User priority
Different user
’
s operation limitation level is set according to the user priority. M8000 system distributes
the user into three priority levels:
A. Three administrators, they have the highest priority: 12;
B. 64 keyboard users, they have 1
～
8 different priority levels, 1 is the lowest level.
C. 64 PC users, they have 1
～
8 different priority levels, 1 is the lowest level.
Note: the front three users of keyboard and PC have 9/10/11 priority level, more prior then 1~8 level.
Administrator can setup the user priority, and carry on the operation as below:
9.6.1 Camera operation command
The inferior user must wait when the prior user is operating the camera.
The inferior user can operate the camera if the prior user hasn
’
t operated it within 20 s.
The prior user can operate the camera directly weather the inferior user uses the camera or not.
The same priority level users can operate one camera together, but each of them must wait until the
other one hasn
’
t operate within 20s.
9.6.2 System menu operation
Only system administrator who
’
s priority level exceed 9 can enter the system menu. Other admin-
istrator can
’
t enter the system menu.
It will exit the main menu setup state automatically when the alarm signals were occur. In this
situation, even the system administrator can
’
t enter the main menu.
The front three keyboard and PC users can
’
t enter the main menu if the user
’
s priority is under 9.
10 area administration
The corresponding setups as below are mainly about fortify setup and alarm setup.
10.1 Probe setup
Set the 1024 probes state: Connected/ Dis-Part.
10.2 Fortify mode setup: Manual/ Auto
Manual mode is fortify temporary, auto mode is scheduled fortify according to the auto fortify form.
10.3 Fortify area setup
You can set the probes at the same area if they need to arm/disarm at the same time. In this case, you can
setup one fortify area instead of setup every probe.
10.4 Auto fortify form
You can select different fortify area and set the arm/disarm time.
10.5 Alarm switch setup
Include setting the alarm mode and the alarm export form.
