-34-
Figure 47 Tour Setup
Setting at<Tour Setup>:
1. After entering the <Tour Setup> menu, user can find the GROUP number flashes. Select group number
(01-88) by moving the joystick up and down or input the number directly. Note: The MAX LENGTH
changes according to the form 1.
Form 1 Tour Steps Instruction
2. Move the joystick right to enter the program sequence. Note: if the sequence has been edited (with steps),
the steps will be displayed. If the sequence has not been edited, only Length 0000 will be displayed (no
steps); if press ENTER key at this time, user can add one step with default setting as 001 000 000 000; the
Length is displayed as Length 0001.
3. After entering the step setting, just move the joystick up and down to select Step number. Turn the joystick
clockwise to enter the setting of Camera ID (figure), Dwell, Preset.
4. Move the joystick left and right, move the flashing cursor to the corresponding item, then change the
numerical value by moving the joystick up and down or input numbers directly.
5. Move the joystick left to exit this setup.
6. Insert: move the joystick to select the insert position. For example, at Step 0005, press ENTER key to
insert a Step 0006 after Step 0005. The Step 0005 and the above steps remain unchanged. The original
numbers of all the steps after Step 0005 will be changed by adding 1. But the contents of all the steps
remain unchanged. The inserted Step 0006 has the original data as 0006 (STEP), 000(CAM), 000(DWELL),
000(PRE). So the user should set the CAM, DWELL, PRE data. After the insertion, the LENGTH number
Tour Setup
===================
Group
:
01 Length(MAX)
:
0064
Page
:
001 Length
:
0008
Steps CAM ID Preset Dwel
l
0001 0001 003 002
0002 0002 012 002
0003 0003 020 002
0004 0004 003 002
0005 0005 004 002
0006 0006 005 002
0007 0007 006 002
0008 0008 070 002
15/7/2004 16:42:32
Group
MAX Length
01--64
64 Steps
65--80
128 Steps
81--84
256 Steps
85--88
512 Steps