-18-
Figure
19 DNS Server
Setting procedure in DNS Server:
1. Old DNS server IP indicates current DNS server IP. User can change it by setting new DNS server IP.
2. Turn joystick left or right to the desired item. Press numeric keypad directly to set.
3. Press ENTER to confirm and return to the upper menu automatically or press CLEAR to
cancel and return to the upper menu automatically if necessary.
5.1.7 System Basic Config
Enter System Basic Config: Move the joystick up or down to let the cursor point to the No.7 item in the
System Setup menu. Move the joystick right or press 7 directly to enter the setting. As figure 20 shows:
Figure
20 System Basic Config
Setting Procedure in System Basic Config:
1. Modify value by press numeric keypad.
2.
Move joystick up or down to enter another editing area.
3. After setting, turn joystick left. The screen will display PRESS ENTER TO UPDATE or PRESS CLEAR
TO CANCEL. Do as the indication.
Note:
1. The maximum value of the editing area is no more than the value in the right bracket
2. The number of monitors should be the multiple of 16. If not, system will change the value to the
multiple of 16 automatically.
3. The number of KB user and PC user must be more than current user ID. If not, system will change the
ID to current user
’
s ID when update.
DNS Server
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Old DNS Server IP
010
．
000
．
000
．
011
New DNS Server IP
000
．
000
．
000
．
000
07-15-04
16:42:32
System Basic Config
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Preset
：
0250
（
0250
）
Camera
：
0512
（
0512
）
Monitor
：
0064
（
0064
）
Alarm In
：
1024
（
1024
）
Alarm Out
：
0064
（
0064
）
KB User
：
0064
（
0064
）
PC User
：
0064
（
0064
）
Area Num
：
0064
（
0064
）
Matrix ID
：
0002 (0032)
07-15-04
16:42:32
