-35-
will be changed by adding 1.
7. Delete: move the joystick to the step which is to be deleted. For example, to delete Step 0005, just press
CLEAR key to delete. 4 steps before the original Step 0005 remain unchanged. The step numbers after the
original Step 0005 will be changed by decreasing 1.
8. After completing all the above settings, turn the joystick anticlockwise to return to the GROUP number
selection menu.
9. If there is other group to be edited, select the group number and repeat the upper steps to complete the
program. Move the joystick left to exit.
5.6 Salvo Setup
Select<Salvo Setup>from<System Setup Menu>: Move the joystick up and down at the <System Setup
Menu>menu, move the flashing cursor to 6, then enter<Salvo Setup>by moving the joystick right or input
number 6 directly at the<System Setup Menu>. As figure 48 shows.
Figure
48 Salvo Setup
Setting at<Salvo Setup>:
1. Group number will flash after entering salvo setup. Move the joystick up and down to select the Group
number (1-10).
2. Move the joystick right to enter steps length setup. Switch steps flash and then move the joystick up and
down to select the switch serial number (01-64).
3. If the sequence has been edited, the details will be displayed; If it is a new sequence, only Steps: 00 Length:
00 display (no content in the list).
4. Move the joystick up and down, left and right to select Monitor ID, Camera ID, and Preset. Move the
flashing cursor to the corresponding item, move the joystick up and down or input number directly to
change the numerical value.
5. Insert: enter step setting, switch steps flash, move the joystick up and down to select insert position. For
example at Step 05, press ENTER key, Step 06 has been inserted into the selected position. The Step 05
Salvo Setup
===================
Group
:
01 MAX Len
:
64
Page
:
01 Steps
:
01 Length
:
01
Monitor CAM ID Preset
0001 0001 00
0002 0002 01
0003 0003 02
0004 0004 03
0005 0005 04
0006 0006 05
0007 0007 06
0008 0008 07
15/7/2004 16:42:32