
28
Double-click "RTS3400 SETUP.
1.
EXE", and then install the software
as per computer instructions.
Click "START" menu, select and
2.
click "USB TO COMPORT" in the
"RTS3400" program from "ALL
PROGRAM"and then install the
driver system of USB programming
cable.
Connect the
3.
optional cable PC03
to the USB port in PC device and
connect the transceiver with the
other end of cable.
Double click "RTS3400" setup
4.
short-cut icon or click "START"
menu to choose RTS3400 entry in
the RTS3400 program from "ALL
PROGRAMS" menu. (Refer to
picture 1)
Programming Software Installing & Starting
(THIS INSTRUCTION TAKES WINDOWS XP AS AN EXAMPLE)
NOTE: The programming software of this transceiver has
identifying system. Therefore, when you start programming
software at the first time, you should connect the transceiver
and then you can run the software, otherwise the software
cannot be run.
The supplied software applies to Windows 7,Windows XP, etc.
As per computer command, choose serial port "COM Port " firstly ,
5.
then click OK to start programming software.
TIPS:
In one individual computer, users need to choose different COM Port
number when USB cable is connected with different USB port.
To program frequency, power on the transceiver firstly. Do not power
on/off the transceiver when it is connected with computer. Otherwise,
the transceiver can not read or write frequency well.
(picture 1)
(picture 2)
Содержание DV-3400
