
14
dot on the LCD twinkles. Under this state, press
/
to set
desired current frequency. Press
to increase the frequency
value by step,
to decrease the frequency value.
Press [PF1] or [PF2] key to confirm the selected
frequency and exit the frequency setting mode. After
entering the setting mode, if users do not set the
frequency or not exit the mode after adjusting the
frequency, the transceiver will exit the setting mode automatically
after 10seconds.
BASIC OPERATIONS
Fast Adjust Frequency
Under VFO( frequency mode), press repeatedly untill the
decimal dot on the LCD twinkles. Under this state, press
/
to set desired current frequency. Press
to increase the
frequency value by 1MHZ,
to decrease the frequency value by
1MHZ.Press [PF1] or [PF2] key to confirm the selected frequency
and exit the frequency setting mode. After entering the setting
mode, if users do not set the frequency or not exit the
mode after adjusting the frequency, the transceiver will
exit the setting mode automatically after 10seconds.
NOTE:
Under channel mode, this function would be hidden.This
function is disabled as factory default. You can enable this
function via programming software.
Channel Selection
Under channel mode, to choose the desired channel, firstly, users
NOTE:
Under channel mode, this function would be hidden. VFO
function is disabled as factory default. You can enable this
function via programming software.
Содержание DV-3400
