manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 147

 

147

User settings

 

User settings

 

1.

 

In the USER section, press [DISP].

 

The USER screen will appear.

 

fig.ScrUserGuide.eps

 

A.

 

Current user indication

 

This shows the current user name.

 

B.C.

 

User list

 

This lists the user settings saved in internal memory and in 
USB memory.

The following items are shown.

In the USER screen, the function buttons perform the following 
operations.

 

1.

 

In the USER section, press [DISP].

 

fig.ScrUser.eps

 

The USER screen will appear.

 

2.

 

From the user list, select the desired user.

 

3.

 

Press [F1 (CHANGE USER)].

 

If a password has been specified, the ENTER PASSWORD 
popup will appear.

 

fig.ScrUserPasswdGuide.eps

 

A.

 

Applicable user indication

 

This indicates the user settings to which the ENTER 
PASSWORD popup applies.

 

B.

 

Password entry field

 

Enter the password in this field.
Use the left/right cursor buttons to move the cursor, and use 
the value dial to change the character at the cursor position.
 “*” is shown for characters not at the cursor position.

In the ENTER PASSWORD popup, the function buttons 
perform the following operations.

 

Accessing the USER screen

 

FILE NAME

Indicates the name of the user settings.

TIME

Indicates the date and time at which the set-
tings were last changed.

STATUS

If a password has been specified, the indica-
tion PASSWORD appears here. In the case of 
a user who has ADMIN privileges, ADMIN 
is indicated.

[F1 (CHANGE  USER)]

Switches to the user set-
tings selected in the list. 

p. 147

[F2 (CREATE USER)]

Creates a new user in 
USB memory.

p. 148

 

[F3 (SAVE  CURRENT)]

 

Saves the user settings 
temporarily held in inter-
nal memory to USB mem-
ory.

p. 149

[F4 (DELETE USER)]

Deletes the user selected 
in the USB MEMORY 
user list.

p. 149

[F5 (USER LEVEL)]

Edits the user level set-
ting.

p. 152

[F6 (USER PREF)]

Edits the user preference 
settings.

p. 152

[F7 (NAME EDIT)]

 

Accesses the NAME EDIT 
popup, where you can edit 
the name of the user set-
tings selected in the USB 
memory user list.

 

p. 149

[F8 (CHANGE  

Password)]

Changes the password 
for the user settings se-
lected in the list.

p. 150

A

B C

 

Switching user settings

 

[F1 (A/a)]

Changes the letter at the cursor location be-
tween uppercase and lowercase. If the charac-
ter is not a letter, it will be replaced by the 
letter “A.”

[F2 (NUM)]

Changes the character at the cursor location to 
“0.”

[F3 (DELETE)]

Deletes the character at the cursor location. 
The characters to the right of the cursor loca-
tion will be moved toward the left.

[F7 (CANCEL)]

Cancels password entry and closes the popup.

[F8 (OK)]

Finalizes password entry and closes the popup.

A B

M-380_e1.book 147 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды