RSS M-380 Скачать руководство пользователя страница 72

Страница: 72 / 246

MATRIX channel operations

Move the cursor to the MATRIX SOURCE SELECT popup
button (p. 70) and press [ENTER].

The MATRIX SOURCE SELECT popup will appear.

ig.ScrMtxSelGuide.eps

Current channel selection indication

This indicates the currently selected channel.

Target MATRIX indication

This indicates the MATRIX that is the target of operations in
the MATRIX SOURCE SELECT popup.

Channel select buttons

These buttons select the channels that will be mixed to the
MATRIX.

In the MATRIX SOURCE SELECT popup, the function buttons
perform the following operations.

Use [F1 (CH 1-24)] or [F2 (CH 25-48)] to access the desired
channel select buttons.

Move the cursor to the desired channel select button, and
press [ENTER] to select it.

Press [F8 (CLOSE)] to close the popup.

If you decide to cancel your channel selection,
press [F6 (SELECT NONE)].

You can copy the mix from one MATRIX to another MATRIX. Use
the COPY MATRIX MIX popup to perform this operation.

Access the CHANNEL DISPLAY screen for the desired
copy-source MATRIX channel.

fig.ScrChDispMtx.eps

Press [F7 (COPY MIX)] to access the COPY MATRIX MIX popup.

fig.ScrMtxCopyGuide.eps

Copy-source channel indication

This indicates the copy-source MATRIX channel.

Copy-destination channel select button

This selects the copy-destination MATRIX channel.

In the COPY MATRIX MIX popup, the function buttons
perform the following operations.

Use the copy-destination select button to select the copy-
destination MATRIX channel.

Press [F3 (PASTE)].

CopyCHoutonf1.eps

A confirmation message will ask you to confirm the copy
operation.

Press [F8 (PASTE)] to copy the mix to the MATRIX channel
you selected in step 3.

If you press [F7 (CANCEL)], the operation will be cancelled.

Sending to MATRIX from

input channels

[F1 (CH 1–24)]

Displays CH1–CH24 as the chan-
nel select buttons.

[F2 (CH 25–48)]

Displays CH25–CH48 as the chan-
nel select buttons.

[F5 (SELECT NONE)]

Cancels the channel selection.

[F8 (CLOSE)]

Closes the popup.

Copying a mix to another

MATRIX

[F3 (PASTE)]

Executes the copy.

[F8 (CLOSE)]

Closes the popup.

M-380_e1.book 72 ページ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Результаты поиска

Содержание M-380

Отзывы:

Бренды по названию

Популярные бренды

RSS M-380, Руководство пользователя

Результаты поиска

Содержание M-380

Отзывы:

Бренды по названию

Популярные бренды