RSS M-380 Скачать руководство пользователя страница 92

Страница: 92 / 246

Input/output patchbay

The input patchbay library lets you store the current input patchbay
settings for later recall.

The INPUT PATCHBAY LIBRARY popup is used to perform input
patchbay library operations.

Access the PATCHBAY screen.

fig.ScrPatchIn1608.eps

Press [F1 (INPUT)] to access the INPUT tab.

Press [F6 (LIBRARY)] to access the INPUT PATCHBAY
LIBRARY popup.

fig.ScrInPatLibGuide.eps

Library data list

This lists the library data.

The function buttons perform the following operations.

* Available only for the User library.

For details on library operations, refer to “Library operations”
(p. 39).

Access the PATCHBAY screen.

ig.ScrPatchIn1608.eps

Press [F2 (OUTPUT)] to access the OUTPUT tab.

fig.ScrPatchOut1608.eps

Press [F3 (REAC A)], [F4 (REAC B)], or [F5 (CONSOLE)] to
select the desired location for the output jack.

Move the cursor to the intersection of the desired channel
and jack, and press [ENTER].

fig.ScrPatchOutChgConf.eps

If a channel is already patched to the output port, a message
will ask you to confirm the output patching change.

Press [F8 (ASSIGN)] to change the output patching.

If you press [F7 (CANCEL)] the output patching change will be
cancelled.

If the “PATCHBAY CHANGE” item in the CONFIRMATION
section of User Preference (p. 155) is unselected, no
confirmation message will appear in step 4.

Using the input patchbay library

[F1 (PRESET)]

Displays the recall-only PRESET li-
brary.

[F2 (USER)]

Displays the USER library, which lets
you recall or store data.

[F4 (RECALL)]

Recalls the library data that is selected
in the list.

[F5 (STORE)]*

Stores settings to the library data that
is selected in the list.

[F6 (LOCK)]*

Locks the library data that is selected
in the list.

[F7 (NAME EDIT)]*

Accesses the NAME EDIT popup for
editing the name of the user library
data that is selected in the list.

[F8 (CLOSE)]

Closes the popup.

Output patchbay operations

Editing the output patching

M-380_e1.book 92 ページ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Результаты поиска

Содержание M-380

Отзывы:

Бренды по названию

Популярные бренды

RSS M-380, Руководство пользователя

Результаты поиска

Содержание M-380

Отзывы:

Бренды по названию

Популярные бренды