manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 188

 

188

 

Management of the M-48 live personal mixer

 

Management of the M-48 live personal mixer

 

In the M-48 MANAGER popup, the function buttons perform 
the following tasks.

 

*

M-48 UPDATE is for future updates of the system program. For 
details on performing the update, refer to the explanation provided 
with the updater.

 

You can assign a USER button to access this popup (p. 154).

A unit name of up to eight characters can be assigned to each M-48. 
If you’re managing multiple M-48 units, use these names to quickly 
distinguish between the units.

 

With the factory settings, the unit name will be “NO NAME.”

 

1.

 

Access the M-48 MANAGER popup (p. 187).

 

fig.ScrM48Manager.eps

 

2.

 

In the M-48 list, move the cursor to the UNIT NAME of the 
desired M-48 and press [ENTER].

 

fig.ScrM48UnitName.eps

 

The NAME EDIT popup will appear.

 

3.

 

Edit the name in the name field.

 

If you turn [F6 (BLINK LEDs)] on, all LEDs of the target M-48 
will flash. You can use this to identify a specific unit.

 

4.

 

Press [F8 (OK)] to finalize the name and close the popup.

 

If you press [F7 (CANCEL)], the operation will be cancelled and 
the popup will close.

 

1.

 

Access the M-48 MANAGER popup (p. 187).

 

fig.ScrM48Manager.eps

 

Item

Explanation

Function of [ENTER]

 

NO.

Indicates the order in 
the list

Accesses the AR-
RANGE UNIT pop-
up

UNIT 
NAME

Indicates the unit 
name

Accesses the NAME 
EDIT popup

MEMORY
NO.

Indicates the current 
memory number

Accesses the M-48 
MEMORY popup

MEMORY 
SAFE

If this is checked, 
MEMORY SAFE is ac-
tivated; recall/store 
operations from the 
M-380 will be prohib-
ited

Check/uncheck

MUTE

If this is checked, the 
M-48’s output will be 
muted

Check/uncheck

 

Button

Operation

See
page

 

[F1 (MUTE CLEAR)]

 

Clears output muting for all 
M-48 units. This will be on 
(light blue) if there are any 
M-48 units whose output is 
muted.

p. 189

[F2 (SETUP)]

Accesses the M-48 SETUP 
popup, where you can make 
settings for the M-48 unit at 
the cursor location.

p. 190

[F3 (COPY)]

Accesses the M-48 COPY 
popup, where you can copy 
settings from the M-48 unit 
at the cursor location to an-
other M-48 unit.

p. 200

[F4 (LIBRARY)]

Accesses the M-48 LIBRARY 
popup, where you can re-
call/store library data for the 
M-48 unit at the cursor loca-
tion.

p. 203

[F5 (LOAD/SAVE)]

Accesses the M-48 LOAD/
SAVE popup, where settings 
of the M-48 at the cursor lo-
cation can be saved to USB 
memory or loaded from USB 
memory.

p. 205

[F7 (UPDATE)]

Updates the M-48’s system 
program.

 

*

 

[F8 (CLOSE)]

Closes the popup

 

Editing the M-48’s unit name

Changing the order of a unit in the 

M-48 list

M-380_e1.book 188 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды