manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 154

 

154

User settings

 

User settings

 

The user buttons are a function for assigning desired functions to the 
USER 1 through 8 buttons (p. 27). You can make settings for 16 user 
buttons. You can operate user buttons 1 through 8 using the USER 1 
through 8 buttons, and you can operate user buttons 9 through 16 by 
holding down [SHIFT] and pressing the USER 1 through 8 buttons.

 

1.

 

Access the USER screen.

 

fig.ScrUser.eps

 

2.

 

From the user list, select the desired user.

 

3.

 

Press [F6 (USER PREF)].

 

The USER PREFERENCE popup will appear.

 

4.

 

Press [F4 (BUTTON 1–8)] (or [F5 (BUTTON 9–16)]) to access 
the BUTTON 1–8 tab (or the BUTTON 9–16 tab.)

 

fig.ScrUserBtnGuide.eps

 

A.

 

Applicable user indication

 

This indicates the user settings to which the USER 
PREFERENCE popup applies.

 

B.

 

User button assign 1–8 (or User button assign 9–16)

 

This area indicates the functions that are assigned to user 
buttons 1–8.

In the USER PREFERENCE popup, the function buttons 
perform the following operations.

 

5.

 

Move the cursor to the desired user button assignment, and 
press [ENTER].

 

fig.ScrUserBtnAsgn.eps

 

The USER BUTTON ASSIGN popup will appear.

 

A.

 

Applicable user button

 

This indicates the user button to which the USER BUTTON 
ASSIGN popup applies.

 

B.

 

FUNCTION list

 

You can select a function from this list.

 

C.

 

PARAMETER 1 and 2 lists

 

Here you can select the parameters of the function you’ve 
selected in the FUNCTION list.

 

6.

 

In the FUNCTION list, select the desired function.

 

7.

 

Next, use the PARAMETER 1 list and PARAMETER 2 list to 
select the parameters.

 

For a list of the functions that can be assigned, refer to “User 
button functions” (p. 208).

 

8.

 

Press [F8 (CLOSE)] to finalize the changes and close the 
USER BUTTON ASSIGN popup.

 

9.

 

Press [F8 (OK)] to finalize the USER PREFERENCE changes 
and close the popup.

 

If you press [F7 (CANCEL)], the changes will be cancelled and 
the USER PREFERENCE popup will close.

 

Using the user buttons

 

Editing the user button assignments

B

A

 

[F1 (LAYER 1/2)]

Accesses the LAYER 1/2 tab.

[F2 (LAYER 3/4)]

Accesses the LAYER 3/4 tab.

[F3 (LAYER 5/6)]

Accesses the LAYER 5/6 tab.

[F4 (BUTTON 1-8)]

Accesses the BUTTON 1–8 tab.

[F5 (BUTTON 9–16)]

Accesses the BUTTON 9–16 tab.

[F6 (OTHER)]

Accesses the OTHER tab.

[F7 (CANCEL)]

Cancels the changes and closes the 
popup.

[F8 (OK)]

Confirms the changes and closes the 
popup.

B

A

C

M-380_e1.book 154 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды