manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 63

 

63

 

AUX channel and MAIN L/R channel operations

 

AUX channel and MAIN L/R channel operations

 

Stereo-link will link the following parameters.

 

•

Attenuator

•

Limiter parameters

•

Four-band EQ parameters

•

Fader parameters

•

MAIN send level, send switch and send point

•

MATRIX send level, send switch and send point

 

MAIN L/R is always stereo-linked.

 

When linked, the limiter will operate in stereo.

You can specify a channel name and color label for each AUX 
channel and MAIN L/R channel. The channel name can be up to six 
characters, and you can select one of eight colors as the color label.

Channel name entry and color label selection are done in the NAME 
EDIT popup.

 

For details on NAME EDIT popup, refer to “Specifying a 
channel name and color label” (p. 51).

Channel settings can be copied to another channel. Channel copying 
is done in the AUX/MAIN COPY popup.

 

1.

 

Access the CHANNEL DISPLAY screen or the desired copy-
source channel.

 

fig.ScrChAux.eps

 

2.

 

Press [F3 (COPY)] to access the AUX/MAIN COPY popup.

 

fig.ScrChCopyOutGuide.eps

 

A.

 

Copy-source channel

 

This indicates the copy-source channel.

 

B.

 

Copy parameter select buttons

 

Here you can select the parameters that will be copied. You 
can select the following parameters.

 

C.

 

Copy-destination channel select buttons

 

Here you can select the copy-destination channel(s).

The function buttons have the following operations.

 

3.

 

Move the cursor to the desired copy parameter select 
button, and press [ENTER] to select it.

 

4.

 

Move the cursor to the desired copy-destination channel 
select button, and press [ENTER] to select it. You can 
select more than one channel.

 

5.

 

Press [F3 (PASTE)].

 

A confirmation message will ask you to confirm the Copy 
operation.

 

6.

 

Press [F8 (PASTE)] to execute the Copy operation.
If you press [F7 (CANCEL)], the operation will be cancelled.

 

About linked parameters

 

Specifying a channel name 

and color label

Copying channel settings to 

another channel

 

ATT

Attenuator

EQ

Four-band EQ

MTX Sends

MATRIX Sends

TO Main

To MAIN (AUX channels only)

Fader

Fader

Balance

Balance

Limiter

Limiter

Group

DCA groups and MUTE groups

 

Button

Operation

 

[F3 (PASTE)]

Executes the copy.

[F8 (CLOSE)]

Closes the popup.

A

B

C

M-380_e1.book 63 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды