manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 151

 

151

User settings

 

User settings

 

You can limit the range of operations that are possible by editing the 
user levels to correspond to the user settings. 
You edit the user level at the USER LEVEL popup.

 

1.

 

In the USER section, press [DISP].

 

fig.ScrUser.eps

 

The USER screen will appear.

 

2.

 

From the user list, select the desired user.

 

You can’t specify the user level for ADMIN.

 

3.

 

Press [F5 (USER LEVEL)].

 

The USER LEVEL popup will appear.

This has four tabs: [F1 (CH 1–24)], [F2 (CH 25–48)], [F3 (AUX/
MAIN/MATRIX)], and [F4 (OTHER)].

 

•

CH 1–24, CH 25–48, AUX/MAIN/MATRIX tabs

 

fig.ScrUserAccessGuide.eps

 

A.

 

Applicable user indication

 

This indicates the user settings to which the USER LEVEL 
popup applies.

 

B.

 

ADMIN button

 

Select this option if you want to give ADMIN privileges to the 
user.

 

C.

 

Channel access permission buttons

 

These buttons select the channels that the user will be able to 
operate. The channels that are selected here will be operable.

 

D.

 

Parameter access permission buttons

 

These buttons select the parameters that the user will be able 
to operate for the channels selected by the channel access 
permission buttons. The parameters that are selected here will 
be operable.

 

•

OTHER tab

 

fig.ScrUserAccessOthGuide.eps

 

E.

 

Other parameter access permission buttons

 

These buttons select other parameters that the user will be 
able to operate. The parameters that are selected here will be 
operable.

 

The “TALKBACK” button in the OTHER PARAMETER 
ACCESS PERMISSION section enables or disables operation of 
the talkback output destination select button (p. 120).

 

The “OSCILLATOR” button in the OTHER PARAMETER 
ACCESS PERMISSION section enables or disables operation of 
the oscillator output destination select button (p. 121).

In the USER LEVEL popup, the function buttons perform the 
following operations.

 

Limiting the range of 

possible operations

 

Accessing the USER LEVEL popup

A B

C

D

 

[F1 (CH 1–24)]

Accesses the CH 1–24 tab.

[F2 (CH 25–48)]

Accesses the CH 25–48 tab.

[F3 (AUX/MAIN/ 
MATRIX)]

Accesses the AUX/MAIN/MATRIX 
tab.

[F4 (OTHER)]

Accesses the OTHER tab.

[F7 (CANCEL)]

Cancels the changes and closes the 
popup.

[F8 (OK)]

Confirms the changes and closes the 
popup.

E

M-380_e1.book 151 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды