manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 148

 

148

User settings

 

User settings

 

4.

 

When you enter the password and press [F8 (OK)], you will 
switch to the user settings you selected in step 2.

 

If you press [F7 (CANCEL)], the user change will be cancelled.

If the password you entered was incorrect, the following error 
message will appear. Press [F8 (OK)] to return to the ENTER 
PASSWORD popup.

 

fig.ScrUserPwdErr.eps

 

You can create user settings if the current user setting has ADMIN 
privileges.

User settings are created on USB memory.

 

1.

 

Connect USB memory to the USB memory connector.

 

2.

 

In the USER section, press [DISP].

 

fig.ScrUser.eps

 

The USER screen will appear.

 

3.

 

Press [F2 (CREATE USER)].

 

fig.ScrCreateUser.eps

 

The CREATE NEW USER popup will appear.

 

4.

 

Use the name edit field to edit the user name.

 

For details on name editing, refer to “Editing a name” (p. 39).

 

5.

 

Press [F8 (CREATE)] to create user settings.

 

The user settings will be created in USB memory.

If you press [F7 (CANCEL)], the operation will be cancelled.

 

The created user settings will be as follows:

 

•User level will be all operations permitted, without ADMIN 

privileges

•User preferences will be the default condition

Switching to user settings in USB memory is performed as 
follows.

• The user settings in USB memory are copied to internal 

memory.

• Operation will switch to the user settings that were copied to 

internal memory.

This means that the current user settings will become the user 
settings in internal memory.

fig.UserLogin.eps

This allows user settings to be used even after the USB memory 
has been exchanged; for example, in order to use the USB 
MEMORY recorder. The user settings copied to internal 
memory are temporary, and will disappear if you switch to 
other user settings.

For this reason, a confirmation message like the following will 
appear when you switch to other user settings, suggesting that 
you save to USB memory.

fig.ScrUserChgnSave.eps

In this confirmation message, the function buttons perform the 
following operations.

[F6 (DON’T SAVE)]

Discards the user settings in internal 
memory and switches the user set-
tings.

[F7 (CANCEL)]

Cancels the change in user settings.

[F8 (SAVE)] 

Saves the user settings from internal 
memory to USB memory, and then 
switches the user settings.

USB MEMORY

INTERNAL MEMORY

USER

USER

CHANGE

COPY

USER

 

Creating user settings

M-380_e1.book 148 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды