manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 38

 

38

Basic operation

 

Basic operation

 

Buttons in the screen are used to turn a function on/off, to execute a 
command, or to access a screen. To operate a button, move the 
cursor to the desired button and press [ENTER].

 

ON/OFF buttons

 

fig.BtnOnOff.eps

 

These are used to turn a parameter or function on/off. The button is 
shown in gray when off, or in color (e.g., red, yellow, or blue) when on.

 

Popup access buttons

 

fig.BtnPopup.eps

 

These are used to access a related popup.

 

Select buttons

 

There are the following two types of select buttons.

• Radio buttons

 

fig.BtnRadio.eps

 

These are used to select one of multiple mutually exclusive choices. 
Only the last-selected button will be selected.

• Check buttons

 

fig.BtnSel.eps

 

These are used when it is possible to select more than one of multiple 
choices. You can select more than one of these items if desired.

 

ALL/CLR buttons

 

fig.BtnAllClr.eps

 

These buttons assist you in operating check buttons. Pressing the 
ALL button will select all applicable check buttons. Pressing the CLR 
button will clear all applicable check buttons.

 

fig.Cursor.eps

 

Knobs in the screen can be operated by the knobs of the CHANNEL 
EDIT section or by the value dial. To use the value dial, move the 
cursor to the desired knob.

 

You can make more detailed settings by holding down [SHIFT] 
while you operate the knobs or the value dial.

 

Purple knobs in the screen cannot be edited from the 
CHANNEL EDIT section.

 

fig.Fader.eps

 

Faders in the screen can be operated by the corresponding fader 
controller or by the value dial. To use the value dial, move the cursor 
to the desired fader.

 

You can make more detailed settings by holding down [SHIFT] 
while you operate the value dial.

 

fig.List.eps

 

The selected item in a list is shown highlighted in red. Use the up/
down keys or the value dial to select a different item.

 

Button operations

 

Knob operations

Fader operations

List operations

M-380_e1.book 38 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды