manualshive.com logo in svg

RSS M-380, Руководство пользователя

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 176

 

176

Other settings and functions

 

Other settings and functions

 

This specifies the month in a range of 1–12.

 

G.

 

DATE knob

 

This specifies the date in a range of 1–31.

In the DATE&TIME popup, the function buttons perform the 
following operations.

 

3.

 

Use the HOUR, MINUTE, and SECOND knobs to specify the 
time.

 

4.

 

Use the FORMAT select buttons to select the date format.

 

5.

 

Use the YEAR, MONTH, and DATE knobs to specify the 
date.

 

6.

 

Press [F6 (SET)] to finalize the setting.

 

The USB MEMORY popup of the SYSTEM SCREEN is used to 
perform USB memory management.

 

Do not disconnect the USB memory or switch off the M-380’s 
power while data is being saved to USB memory or being 
loaded from it. Doing so may destroy the data saved in USB 
memory.

 

1.

 

In the SETUP section, press [SYSTEM].

 

fig.ScrSystem.eps

 

The SYSTEM screen will appear.

 

2.

 

Press [F6 (USB MEMORY)].

 

The USB MEMORY popup will appear.

 

fig.ScrSysUSBMemGuide.eps

 

A.

 

USB memory information

 

This area shows information about the USB memory.
The following information is shown.

 

B.

 

File list

 

This area shows the files in the USB memory.

 

If you move the cursor to a folder and press [ENTER], you’ll 
move to the level below that folder. If you move the cursor to 
“..” and press [ENTER], you’ll move to the level above the 
current folder.

In the USB MEMORY popup, the function buttons perform the 
following operations.

[F6 (SET)]

Finalizes the specified date and time.

[F8 (CLOSE)]

Closes the popup.

 

Managing USB memory

 

Accessing the USB MEMORY popup

 

Format

Type of format

Volume Size

Total capacity of USB memory

Free Size

Available space in USB memory

[F1 (FORMAT)]

Formats the USB memory.

p. 177

[F2 (MAKE FOLD-
ER)]

Creates a folder in the list.

p. 177

[F3 (NAME EDIT)]

Accesses the NAME EDIT 
popup, where you can edit 
the file name.

p. 177

[F4 (COPY)]

Copies the file at the cursor 
position in the list.

p. 178

[F5 (PASTE)]

Pastes the copied file into 
the list.

p. 178

[F6 (DELETE)]

Deletes the file at the cur-
sor position in the list.

p. 178

[F7 (SPEED TEST)]

Tests the speed of USB 
memory.

[F8 (CLOSE)]

Closes the popup.

A

B

M-380_e1.book 176 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды