A4
US
US
A4
US
A4
A4
US
41
Redefining Flow Control
POS I T
REMOTE
basic setup
wARnIng
If no fuRTheR seTTIng Is ReQuIRed The
ACTuAToR MusT be seT To ReMoTe
opeRATIon Mode befoRe RefITTIng CoveR!
For Further information on the Basic and Advanced setting
menus refer to page 43.
If no further adjustment is necessary the top cover can now
be replaced.
RefIT Top CoveR AsseMbLy
wARnIng
IsoLATe ALL eLeCTRICAL suppLIes befoRe
ReAsseMbLy.
CAuTIon
ReAsseMbLy wITh The Top CoveR InCoRReCTLy
ALIgned MAy ResuLT In dAMAge To The eLeCTRonIC
And MAnuAL oveRIde CoMponenTs.
Visually check the alignment of the cover and the Handwheel
shaft with its original orientation.
As you look at the LCD window, replace the housing so that
the Rotork Logo can be read on the cover right side up.
Fig. 41.2
Fig. 41.3
Fig. 41.4
Fig. 41.1