A4
US
US
A4
US
A4
US
A4
34
3. seLeCT ACTIon AT end of TRAveL
CA LIM shows the actuator is set for Position Limit action at
the Closed end of travel.
To change the end of travel action press ENTER.
The actuator is now in EDIT Mode.
Use the UP/DOWN buttons to select the required end of
travel action.
Fig 34.3 shows the Closed End of Travel Action set to FRC
(FORCE) and the set output closing torque or thrust will be
applied to the valve seat at the end of travel.
Press ENTER to save any changes.
Press CANCEL to return to previous menu.
noTe ensure that any changes to parameters are sAved
before returning to vIew Mode.
Use the UP/DOWN Buttons to select the Open Action (OP
ACT) and repeat the procedure to select the Action at End of
Travel.
AfTeR sAvIng Any ChAnges pRess CAnCeL unTIL
you hAve ReTuRned To The Top LeveL bAsIC Menu
And posIT Is dIspLAyed.
basic setup
LOCAL
POS I T
Fig. 34.6
LOCAL
OP ACT
X
X
X
X
VIEW
LOCAL
CA LIM
EDIT
LOCAL
CA FRC
LOCAL
CA LIM
VIEW
LOCAL
SAVED
VIEW
EDIT
Fig. 34.1
Fig. 34.2
Fig. 34.3
Fig. 34.4
Fig. 34.5
