A4
US
US
A4
US
A4
US
A4
14
LCd dIspLAy
The main PCB has a LCD Display used to show STATUS and
configuration information
On power up the default screen is the POSIT parameter.
The actuator will indicate Local or Remote mode selected in
top left hand corner of the LCD.
see basic setup Mode for details.
seTup pushbuTTons
Four push button switches are located on the main PCB below
its LCD Display and are used to view and change the actuator
configuration parameters.
The Switch Functions are as follows:
‘up’
Used to navigate menus in view mode. Increase parameter
values in Edit Mode.
‘down’
Used to navigate menus in view mode. Decrease parameter
values in Edit Mode.
‘Mode/CAnCeL’
Used to exit and go to previous Menu.
enTeR
Used to enter and save changes to configuration parameters
Installation & setup
LOCAL
POS I T
‘up’
‘down’
‘Mode/CAnCeL’
enTeR
POS I T
REMOTE
Remote Mode selected
Alarm Active
Fig. 14.1
Fig. 14.2
