A4
US
US
A4
US
A4
A4
US
Redefining Flow Control
3
Introduction
Rotork Process Controls designs, manufactures,
and tests its products to meet many national
and international standards. For these products
to operate within their normal specifications,
they must be properly installed and maintained.
The following instructions must be followed and integrated
with your safety program when installing and using Rotork
Process Controls products:
• Read and save all instructions prior to installing, operating
and servicing this product.
• If you don’t understand any of the instructions, contact
Rotork Process Controls for clarification.
• Follow all warnings, cautions and instructions marked on,
and supplied with, the product.
• Inform and educate personnel in the proper installation,
operation and maintenance of the product.
• Install equipment as specified in Rotork Process Controls
installation instructions and per applicable local and
national codes. Connect all products to the proper
electrical sources.
• To ensure proper performance, use qualified personnel to
install, operate, update and maintain the unit.
• When replacement parts are required, ensure that the
qualified service technician uses replacement parts
specified by Rotork Process Controls. Substitutions may
result in fire, electrical shock, other hazards, or improper
equipment operation.
• Keep all product protective covers in place (except
when installing, or when maintenance is being performed
by qualified personnel), to prevent electrical shock,
personal injury or actuator damage.
• Operation of actuator in an inappropriate fashion
may cause harm or damage to unit or other equipment
surroundings.