rotork CML-100, Инструкция по установке и обслуживанию

Страница: 7 / 60

A4 US
US
A4
US
A4
A4 US
7
Redefining Flow Control
general Information
Mechanical performance
The rated force (thrust or torque) for each size of actuator is
detailed below. The minimum settable force is 40% of the
maximum rated. Operating time tol/-10%.
The CML and CMQ can resist backdriving forces from the
valve up to 125% of rated load without movement.
All CMA actuators are factory calibrated.
Model
Min Thrust
(lbf)
Min Thrust
(n)
Max Thrust
(lbf)
Max Thrust
(n)
speed
(inches/sec)
speed
(mm/sec)
stroke
(inches)
stroke
(mm)
CML-100 40 177.9 100 444.8 0.25 6.35 1.5 38.1
CML-250 100 444.8 250 1112 0.125 3.18 1.5 38.1
CML-750 300 1334.5 750 3336.2 0.063 1.68 2 50.8
CML: Linear Actuator
Model
Min Torque
(lbf.in)
Min Torque
(nm)
Max Torque
(lbf.in)
Max Torque
(nm)
Time for Quarter-
Turn (secs)
CMQ-250 100 11.3 250 28.2 10
CMQ-500 200 22.6 500 56.5 15
CMQ-1000 400 45.2 1000 113.0 22
CMQ: Quarter-Turn Actuator
vibration, shock and noise
CMA actuators are suitable for applications where vibration and shock severity does not exceed the following:
Type Level
Plant induced vibration
1 g RMS total for all vibration within the frequency range of 10 to 1000Hz.
Shock 5 g peak acceleration.
Seismic 2 g acceleration over a frequency range of 1 to 50 Hz if it is to operate during and after the event.
5 g over a frequency range of 1 to 50 Hz if it is only required to maintain structural integrity.
Emitted noise
Independent tests have shown that at 1 m generated noise does not exceed 61 db (A).
Levels quoted are those present at the actuator mounting interface. It should be noted that the effects of vibration are cumulative and therefore an actuator
subjected to significant levels may have reduced life.
CMR: Rotary Actuator
Model
Min Torque
(lbf.in)
Min Torque
(nm)
Max Torque
(lbf.in)
Max Torque
(nm)
speed (RpM)
Total turns
available
CMR-50 20 2.3 50 5.6 11
90º to 320 turns in 2º
increments
CMR-100 40 4.5 100 11.3 10
90º to 320 turns in 2º
increments
CMR-125 50 5.6 125 14.1 18
90º to 320 turns in 2º
increments
CMR-200 80 9.0 200 22.6 5 90º to 320 turns in 2º
increments
CMR-250 100 11.3 250 28.2 10 90º to 320 turns in 2º
increments