Rokonet ORBiT-14, Руководство по установке

Страница: 30 / 60

Installation Manual
24
Location: 014 Bell delay Default: 00
The time delay before the keypad sounder and the external sounder operates after
the onset of an alarm.
Enter the number of minutes (between 00 and 90).
Periodic Test: Locations 015-016
The Periodic Test menu enables you to set the time period that the ORBIT-14 will
automatically call the Central Station or Upload/Download phone numbers in order to
check the phone line connection and the unit’s digital communicator.
NOTE:
The Periodic Test cannot occur if the value of the Start Periodic Time or Periodic Test interval is
set to zero.
Location: 015 Start Periodic Test Default: 0000
Sets the start time of the periodic test. The chosen time is expressed in 24-hour
format. Examples: 8:30 AM = 0830, 4:30 PM = 16:30.
NOTE:
If desired, you can disable the test transmission capability by entering the default (0000).
Entering the installation mode after the indicated time will defer the test transmission until the
indicated periodic test time on the following day
.
Location: 016 Periodic Test Interval Default: 00
Sets the interval for periodic test reporting. Enter two digits between 00 and 99 hours.
NOTE:
If desired, you can disable the test transmission capability by entering the default 00 as the
periodic test interval.
Zone Types and Sounds:
Locations 017-030
Locations 017 through 030 are identical and correspond to Zones 1 through 14. Each
of these locations contains two digits.
• First digit : Contains the number used to represent the Type of Zone desired.
• Second digit : Contains the number used to represent the sound produced
when in alarm.
Locations: 017-030 Zone 1-14: (1
st
Digit): Zone Type
1
st
Digit Zone Type and Comments
0
Not Used
All unused zones should be given this designation. It is also used to disable a zone.
1
24-Hour
Usually assigned to protect non-movable glass, fixed skylights or cabinets for shock
detection systems. A violation of such a zone will always cause an instant intrusion
alarm, regardless of the system’s armed/disarmed state.