Rokonet ORBiT-14, Руководство по установке

Страница: 40 / 60

Installation Manual
34
Location: 052 Dialler Controls 1: (2
nd
Digit):
2
nd
Digit Redial Wait Answering Machine Follow Me Enable
3 60 No No
4 Immediate Yes No
5 20 Yes
No
6 30 Yes No
7 60 Yes No
8 Immediate No Yes
9 20 No
Yes
A 30 No Yes
B 60 No Yes
C Immediate Yes Yes
D 20 Yes
Yes
E
(Default)
30 Yes Yes
F 60 Yes Yes
Dialler Control 2: Location 053
• First digit : Not applicable, Always “0”
• Second digit : Determines whether:
1. The ORBIT-14 is connected to a telephone and if the line is supervised. If
the telephone line is cut for more than four minutes, supervision causes
phone line trouble.
2. The dialler waits for a dial tone before it starts dialling.
Location: 053 Dialler Controls 2: (2
nd
Digit):
2
nd
Digit Wait for Dial Tone
Telephone Connection and
Supervision
0 No No
1 No Yes
2 Yes No
3
(Default)
Yes Yes
Central Station Pulsed Protocols: Location 054
The code format of the central station protocols is based on the following information.
• First digit : Determines the number corresponding to the desired combination
of: Kissoff/Handshake Freq / Message Validation / Extended-Non-Extended
Format.
• Second digit : Determines the number (or letter) corresponding to the desired
combination of: Dialling Rate / Intrepidity Time / Data Frequency.
NOTE:
The pulsed protocol definition is only applicable if the value “00”, which represents a “Pulsed
Protocol” format, is entered in location 55.