Rokonet ORBiT-14, Руководство по установке

Страница: 48 / 60

Installation Manual
42
Communicator Reporting Codes:
Locations 062-168
Locations 062 -168 enable you to program the codes that will be transmitted by the
ORBIT-14 to the Central Station.
To prevent the corresponding event from being reported, use a “double-zero” (00, the
default) in the location.
Reporting Codes for Alarm Events
Location Description
Digits Default Report
Code
062 Zone 1 Alarm Reporting code 2 00
063 Zone 2 Alarm Reporting code 2 00
064 Zone 3 Alarm Reporting code 2 00
065 Zone 4 Alarm Reporting code 2 00
066 Zone 5 Alarm Reporting code 2 00
067 Zone 6 Alarm Reporting code 2 00
068 Zone 7 Alarm Reporting code 2 00
069 Zone 8 Alarm Reporting code 2 00
070 Zone 9 Alarm Reporting code 2 00
071 Zone 10 Alarm Reporting code 2 00
072 Zone 11 Alarm Reporting code 2 00
073 Zone 12 Alarm Reporting code 2 00
074 Zone 13 Alarm Reporting code 2 00
075 Zone 14 Alarm Reporting code 2 00
076 Keypad Fire Alarms Reporting code 2 00
077 Keypad Panic Reporting code 2 00
078 Keypad Special Emergency Reporting code 2 00
079 Tamper Alarm in zone 1 / 9 2 00
080 Tamper Alarm in zone 2 / 10 2 00
081 Tamper Alarm in zone 3 / 11 2 00
082 Tamper Alarm in zone 4 / 12 2 00
083 Tamper Alarm in zone 5 / 13 2 00
084 Tamper Alarm in zone 6 / 14 2 00
085 General tamper alarm (Box / Bell /Keypad) 2 00
Restore Codes
An ORBIT-14 Restoral Report informs the Central Station that the external sounder’s
operation, initially triggered by the respective alarm condition, has either “timed out”
or been silenced by the act of system disarming. Be sure to check with Central
Station personnel if restorals are permitted and, if so, what codes are required.