Rokonet ORBiT-14, Руководство по установке

Страница: 3 / 60

Installation Manual
iii
Customer Information
TELEPHONE CONNECTION (Ref.: FCC Part 68)
1. This equipment, Alarm Control Panel, brand named Orbit-14 (RP214MA0000A), complies with
Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom panel of
this equipment is a label that contains among other information, a product identifier in the format
US:RKEAL10BRP214MA. If requested, this number must be provided to the telephone company.
2. This equipment is designed to be connected to the telephone network using a terminal block,
which is Part 68 compliant and properly installed RJ31X connector. See Installation Instructions
for details.
3. The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company. The REN of alarm system is part of the product
identifier that has the format US:RKEAL10BRP214MA.
4. If the Alarm Control Panel causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. If advance
notice is not practical, you will be notified as soon as possible. Also, you will be advised of your
right to file a compliant with the FCC if it is necessary.
5. The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service.
6. If trouble is experienced with the Alarm Control Panel, for repair or warranty information please
contact Rokonet Industries USA Inc 2822 NW 79th Ave. Miami, Florida 33122 USA, phone
number 305 592 3820, URL: sales@rokonetusa.com.
If the equipment is causing harm to the telephone network, the telephone company may request
to disconnect the equipment until the problem is resolved.
7. The control panel installation is described in the Installation Manual. Connection to telephone
company provided coin service is prohibited. Connection to party lines service is subject to state
tariffs.
8. Alarm Control Panel must be able to seize the telephone line and place a call in an emergency
situation. It must be able to do this even if other equipment (telephone, answering system,
computer modem, etc.) already has the telephone line in use. To do so, the alarm control panel
must be connected to a properly installed RJ31X jack that is electrically in series with and ahead
of all other equipment attached to the same telephone line. Proper installation is depicted in the
figure below. If you have any questions concerning these instructions, you should consult your
telephone company or a qualified installer about installing the RJ31X jack and Alarm Control
Panel for you.