Rokonet ORBiT-14, Руководство по установке

Страница: 14 / 60

Installation Manual
8
•
Do not short the terminals of the transformer together. This causes the internal
fuse to blow. The transformer must be connected to a 230 VAC 24-hour outlet,
which must be controlled by an approved over-current protection device.
• The control is designed with reverse polarity protection on the battery charging
circuit; however, prolonged improper connection of the battery to the control
panel results in damage. Power should remain disconnected until all connections
have been made and checked for accuracy.
Wiring the Main Panel
Connecting to Ground (Earth)
Connect the metal box and the door of the metal box to mains earth (ground), as
shown in the diagrams below. Refer also to
What Makes a Good Ground , page 9.
IMPORTANT:
Connecting to ground must be performed according to the applicable local or national electrical
codes.