Remote Control Basics
R&S
®
NRPxxA(N)
154
User Manual 1177.6017.02 ─ 05
Table 11-11: Meaning of bits used in the operation calibrating status register
Bit No.
Meaning
0
Not used
1
Sensor calibrating
The sensor is being calibrated
5 to 15
Not used
11.3.8.2
Operation Measuring Status Register
The
CONDition
register contains information about whether a measurement is being
performed by a sensor and, depending on the configuration of the transition register.
The
EVENt
register indicates whether a measurement was started or completed since
the last readout of this register.
Querying the register:
●
STATus:OPERation:MEASuring:CONDition?
●
STATus:OPERation:MEASuring[:SUMMary][:EVENt]?
Table 11-12: Meaning of bits used in the operation measuring status register
Bit No.
Meaning
0
Not used
1
Sensor measuring
The sensor is performing a measurement.
5 to 15
Not used
11.3.8.3
Operation Trigger Status Register
The
CONDition
register contains information about whether a sensor is in the waiting
for trigger state, i.e. expecting a trigger event and, depending on the configuration of
the transition register. The
EVENt
register indicates whether the waiting for trigger state
was entered or quit by a sensor since the last readout of the register.
Querying the register:
●
STATus:OPERation:TRIGger:CONDition?
●
STATus:OPERation:TRIGger[:SUMMary][:EVENt]?
Table 11-13: Meaning of bits used in the operation trigger status register
Bit No.
Meaning
0
Not used
1
Sensor waiting for trigger
The sensor is in the waiting for trigger state and is waiting for a trigger event. When the
trigger event occurs, the sensor changes into the measuring state.
5 to 15
Not used
Status Reporting System
