Getting Started
R&S
®
Spectrum Rider FPH
74
User Manual 1321.1011.02 ─ 11
Connecting the R&S Spectrum Rider in an existing LAN
You can either get the R&S Spectrum Rider IP address automatically from the DHCP
server or manually assign a fixed address.
With manual allocation, a fixed IP address and subnet mask must be assigned to the
R&S Spectrum Rider as described in
Chapter 3.2.8.1, "LAN Connection"
After setting up the R&S Spectrum Rider, configure the R&S InstrumentView software
with the assigned IP address as described in
"Configuring the R&S InstrumentView
Free IP address
Contact your IT system administrator to get a free IP address.
In networks with a DHCP server, the DHCP permits automatic allocation of the network
configuration to the R&S Spectrum Rider connected via LAN cable. For this purpose,
the DHCP has to be active on the R&S Spectrum Rider.
The DHCP is off by default. Turn it on like this:
Instrument Tour
www.allice.de
Allice Messtechnik GmbH
