113
La modifica di un indirizzo di una locomotiva nell’archivio non ha alcun effetto sull’indirizzo me
-
morizzato nel decoder della locomotiva. Questo potrà essere quindi modificato con il “CV1“. Si
prega di osservare in merito quanto riportato al capitolo “Programmazione rapida“ a pagina 107
o “Modificare CV” a pagina 114.
1.3.
“CANCELLARE“
Con questa voce di menu è possibile rimuovere una locomotiva dall’archivio.
La prima schermata visualizza l’ultima locomotiva utilizzata in modalità Locomotiva. Attraverso i
“tasti freccia“ è possibile selezionare la locomotiva che si desidera rimuovere.
▪
Confermare con il tasto “Luce / OK“.
Nella schermata successiva appare la scritta scorrevole “?CANCELLARE?”
▪
Confermare la cancellazione nuovamente con il tasto “Luce / OK”. Si ritorna al livello di partenza
“CANCELLARE“.
La locomotiva è stata rimossa dall’archivio e viene arrestata automaticamente (arresto di emergenza
selettivo) se si trova ancora in corsa. Fino al momento in cui sarà possibile reinserire la locomotiva
nell’archivio, un controllo sarà possibile solo attraverso la modalità Indirizzo locomotiva.
1.4.
“CERCARE“
Questo comando potrebbe diventare un’importante funzione del vostro multi
MAUS
. Con questa voce
di menu è possibile assegnare un indirizzo nell’archivio alla relativa locomotiva.
Immettere un indirizzo attraverso i “tasti funzione” ed il multi
MAUS
cercherà la locomotiva corri-
spondente nell’archivio.
▪
Premendo il tasto “Luce / OK“ si conferma l’immissione. Il multi
MAUS
ritorna indietro nella modalità Loco
motiva e visualizza la locomotiva assegnata.
Nel caso in cui il multi
MAUS
non riesca a trovare per l’indirizzo la locomotiva adatta, sul display
sarà visualizzata la voce “ERR 9”. Con il tasto “STOP” o “Luce / OK” si ritorna al livello di partenza
“CERCARE”.
1.5.
“INVIARE
1.6.
“RICEVERE”
Queste due voci di meni sono necessari quando si desidera trasmettere l’archivio di una locomotiva
di un multi
MAUS
ad un altro multi
MAUS
(o diversi multi
MAUS
). A tal fine è necessario impostare un
multi
MAUS
trasmettitore su “TRASMETTERE“, l’altro o più multi
MAUS
su “RICEVERE“. Premendo il
tasto “LUCE / OK” sul multi
MAUS
trasmettitore si avvia la trasmissione. Il multi
MAUS
ricevitore al ter-
mine della trasmissione si trova in modalità Archivio, il multi
MAUS
trasmettitore si trova sul piano di
partenza “INVIARE”.
1.7.
“MODO“
Una locomotiva può essere controllata dalla modalità Archivio preimpostata in fabbrica o semplice-
mente attraverso l’indirizzo della locomotiva. Le impostazioni preferite possono essere selezionate
attraverso questa voce di menu.
8051281925.indd 113
10.05.2016 12:52:28
Содержание MultiMAUS
Страница 63: ...63 8051281925 indd 63 10 05 2016 12 52 19 ...
Страница 95: ...95 8051281925 indd 95 10 05 2016 12 52 24 ...
Страница 126: ...126 126 8051281925 indd 126 10 05 2016 12 52 29 ...
Страница 127: ...127 8051281925 indd 127 10 05 2016 12 52 29 ...