manualshive.com logo in svg

Rockwell Automation Allen-Bradley 1734-IB8S, Руководство пользователя

Rockwell Automation Allen-Bradley 1734-IB8S - это модуль дискретного ввода с количеством входов и стабильной работой. Для получения бесплатного руководства по эксплуатации скачайте его с manualshive.com. Все необходимые инструкции и руководства доступны в формате PDF для вашего удобства.

Поделиться
Скачать
background image

Rockwell Automation Publication 1734-UM013J-EN-P - July 2014

53

Install the Module

Chapter 4

North American Hazardous Location Approval

Environment and Enclosure

 

The following information applies when operating this 
equipment in hazardous locations.

Informations sur l’utilisation de cet équipement en 
environnements dangereux.

Products marked “CL I, DIV 2, GP A, B, C, D” are suitable for use in 
Class I Division 2 Groups A, B, C, D, Hazardous Locations and 
nonhazardous locations only. Each product is supplied with 
markings on the rating nameplate indicating the hazardous 
location temperature code. When combining products within a 
system, the most adverse temperature code (lowest “T” number) 
may be used to help determine the overall temperature code of the 
system. Combinations of equipment in your system are subject to 
investigation by the local Authority Having Jurisdiction at the time 
of installation.

Les produits marqués “CL I, DIV 2, GP A, B, C, D” ne conviennent qu'à une 
utilisation en environnements de Classe I Division 2 Groupes A, B, C, D 
dangereux et non dangereux. Chaque produit est livré avec des 
marquages sur sa plaque d'identification qui indiquent le code de 
température pour les environnements dangereux. Lorsque plusieurs 
produits sont combinés dans un système, le code de température le plus 
défavorable (code de température le plus faible) peut être utilisé pour 
déterminer le code de température global du système. Les combinaisons 
d'équipements dans le système sont sujettes à inspection par les 
autorités locales qualifiées au moment de l'installation.

EXPLOSION HAZARD -

•

Do not disconnect equipment unless power 
has been removed or the area is known to be 
nonhazardous. 

•

Do not disconnect connections to this 
equipment unless power has been removed or 
the area is known to be nonhazardous. Secure 
any external connections that mate to this 
equipment by using screws, sliding latches, 
threaded connectors, or other means provided 
with this product.

•

Substitution of components may impair 
suitability for Class I, Division 2.

•

If this product contains batteries, they must 
only be changed in an area known to be 
nonhazardous.

RISQUE D’EXPLOSION – 

•

Couper le courant ou s'assurer que l'environnement 
est classé non dangereux avant de débrancher 
l'équipement.

•

Couper le courant ou s'assurer que l'environnement 
est classé non dangereux avant de débrancher les 
connecteurs. Fixer tous les connecteurs externes 
reliés à cet équipement à l'aide de vis, loquets 
coulissants, connecteurs filetés ou autres moyens 
fournis avec ce produit.

•

La substitution de composants peut rendre cet 
équipement inadapté à une utilisation en 
environnement de Classe I, Division 2.

•

S'assurer que l'environnement est classé non 
dangereux avant de changer les piles.

ATTENTION: 

This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II 

applications (as defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating.

This equipment is not intended for use in residential environments and may not provide adequate protection to radio 
communication services in such environments.

This equipment is supplied as open-type equipment. It must be mounted within an enclosure that is suitably designed for those 
specific environmental conditions that will be present and appropriately designed to prevent personal injury resulting from 
accessibility to live parts. The enclosure must have suitable flame-retardant properties to prevent or minimize the spread of flame, 
complying with a flame spread rating of 5VA or be approved for the application if non-metallic. The interior of the enclosure must be 
accessible only by the use of a tool. Subsequent sections of this publication may contain additional information regarding specific 
enclosure type ratings that are required to comply with certain product safety certifications.

In addition to this publication, see the following:

•

Industrial Automation Wiring and Grounding Guidelines, publication 

1770-4.1

, for additional installation requirements.

•

NEMA Standard 250 and IEC 60529, as applicable, for explanations of the degrees of protection provided by enclosures.

Содержание Allen-Bradley 1734-IB8S





















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Allen-Bradley 1734-IB8S

N-Com B901 Quick Manual preview
B901
Бренд: N-Com Страницы: 2
CAME BPT XTS 5IP WH Installation And Setting Manual preview
XTS 5IP WH
Бренд: CAME BPT Страницы: 16
Bticino 323004 Quick Start Manual preview
323004
Бренд: Bticino Страницы: 2
FAIE 12460 Manual preview
12460
Бренд: FAIE Страницы: 5
R. Beck Maschinenbau 197.100.00 Operating Manual preview
197.100.00
Бренд: R. Beck Maschinenbau Страницы: 34
CAME 001CS2PLCO Installation Manual preview
001CS2PLCO
Бренд: CAME Страницы: 16
Aiphone JP-DVF-RP10 Instructions preview
JP-DVF-RP10
Бренд: Aiphone Страницы: 2
Coby COBY CX-CD375 Specification Sheet preview
COBY CX-CD375
Бренд: Coby Страницы: 1
M-E ADF-710 Operating & Assembly Instructions preview
ADF-710
Бренд: M-E Страницы: 72
AMGO Hydraulics OH-15 Installation And Service Manual preview
OH-15
Бренд: AMGO Hydraulics Страницы: 40
PAPILLON 95047 Instruction Manual preview
95047
Бренд: PAPILLON Страницы: 8
Acces ETH-DIO-24 User Manual preview
ETH-DIO-24
Бренд: Acces Страницы: 18
Bishamon LV50WE Operation And Service Manual preview
LV50WE
Бренд: Bishamon Страницы: 7
Commax CDV-1024MA User Manual preview
CDV-1024MA
Бренд: Commax Страницы: 28
M-system R7L-EA16 Instruction Manual preview
R7L-EA16
Бренд: M-system Страницы: 3
OBSIDIAN CONTROL SYSTEMS NETRON DMX10 Installation Manual preview
NETRON DMX10
Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 28
Vahle DCS1-HW Instructions Manual preview
DCS1-HW
Бренд: Vahle Страницы: 100
Bosch VLH 2155 Manual preview
VLH 2155
Бренд: Bosch Страницы: 212

Бренды по названию

Популярные бренды

Загрузить еще бренды