Roberts Gorden CORAYVAC, Руководство по установке

Страница: 63 / 119

SECTION 8: P
ROGRAMMING AND
T
ROUBLESHOOTING THE
S
YSTEM
59
8.2 Home Screen and Programming the System
The following instructions provide a general overview
of programming your system. Each controller on the
network must be programmed separately. When pro-
gramming for controller is complete, select the
home
icon to return to the System View screen. Select the
next controller on the network and repeat the pro-
gramming instructions. For detailed instructions,
please refer to the CORAYVAC
® /COMPLETE™ Mod-
ulating Heating Control installation and operation
manual.
Home Icon
Note: Prior to programming the system, ensure that
Initial Touchscreen Setup has been complete,
see
Page 45, Section 5.8
.
Home Screen Map
Note: For detailed touchscreen navigation, reference
the Touchscreen Navigation Tree, located on
Page
104, Section 13
.
8.3 Home Screen System Configuration
From the Home screen select <menu> to access the
list of property menus. Scroll down and select
<Configuration - Service> .
The Configurations-Service screen is used to
adjust how many zones, vacuum pumps, and the
type of heating system that is connected to the con-
troller you are programming.
Select the box next to 'Number of Zones' and set
the number of zones connected to that controller.
Select the box next to each
'Zone "#" Selection' and
choose the type of heating system that is associated
with that zone.
Example 1: If the controller is controlling two
CORAYVAC
®
systems with a combination of four
heating zones, the user must assign which vacuum
pump is associated with each zone. If zones 1 and 2
are connected to vacuum pump 1, then set
'Zone 1
Selection' and 'Zone 2 Selection' both to <Vacuum
Pump 1> . Set 'Zone 3 Selection' and 'Zone 4
Selection' to <Vacuum Pump 2> .
Example 2: If the controller is controlling unitary
heaters, select <Unitary Modulating> or <Unitary
On/Off> (depending on what type of unitary heater is
installed) to the appropriate 'Zone "#" Selection' .
To Home Screen To Alarm Manager Screen
To Access Individual
Zone Temperature
and Setpoint
Configuration Screens
Pump On/Off
and Run % Status
Outside Air
Temperature
To Access
List of All Active
and Inactive Alarms
To Access List of
Property Menus